Wuxi Chino Machinery Co.,ltd

Wuxi Chino Machinery Co.,ltd

       Espert in making CNC sheet metal V slot cutting / V groover / V grooving machine

Products Category

• Development of SVG02K CNC V Gr

• [Trouble shooting] V groover c

• V groover Back gauge calibrati

• Saudi CNC V grooving machine t

• V grooving machine for curtain

Contact Us

Tel: +86-510-88888955
Fax: +86-510-84060350
Mobile: +86-15961782150 (24hrs)
E-mail: chinomach@126.com
Add: 1611,18-1,WenHui road, Huishan, Wuxi, Jiangsu, China


V groover Back gauge calibration method

Author : V groove tech Date : 2013/9/17 22:12:25
   After a long time working, the V groover's back gauge fix screw may be loosen. User may find that the V grooves is not paraller with the plate edge. we will need to recalibrate the back gaugee. Method is as following:
1. adjust V groover's two back gauge clamp equal distance to the platform edge. (e.g, No.2 and No.4 clamp)
2. loosen others V groove back gauge clamp (No.1, No.3, No.5, No.6) screws. 
3. use hydraulic shear to cut one straight edge on one plate (3m long). then put the plate straight edge on the V grooving machine, against two clamp(NO.2, No.4) positioning point. clamps hold the plate.
4. fix other back gauge clamps' screws, with the positioning point against the plate edge. 
5. put test V grooving plate to test the machine.